In order to press seeds in our machines, the seeds must have at least 8% fat content and have no more than 8% moisture. The seeds and nuts should be dry in order to be pressed. The main seeds that you can easily extract oils from are as follows:
Black Cumin, Sunflower seed, Safflower, Canola, Pistachio, Pumpkin Seed, Melon Seed, Babassu Kernel, Palm Kernel, Cumin Seed, Grape Seed, Coconut, Lauri Fructus (Laurel), Apricot Seed, Sesame, Hazelnut, Peanut, Walnut, Opium Poppy, Flax Seed, Almond, Jajoba, Mustard Seed, Nettle Seed, Raspberry Seed, Pepper Seed, Tomato Seed, Rose Hip, Jatropha, Cocoa Bean, Soy Bean, Blueberry Seed, Pomegranate Seed, Prickly Pear (Cactus) Seed, Barbary Fig Seed, Fig Seed, Lemon Seed, Black Chia Seed, Amaranth, Hemp, Camelina, Moringa Seed, Rapeseed, Baobab Seed, Argan Seed, Primrose Seed, Cotton Seed, Milk Thistle, Cherry Seed, Water Melon Seed, Terebinth Seed, Avocado, Orange Peel, etc.
Average oil output rate is as follows:
1 kg Pomegranate Seed -> 10% oil
1 kg Coconut -> 55% oil
Olive oil cannot be pressed in any of our machines. Our R&D studies continue for the olive oil press.
There are differences between cold press oil machines in terms of capacity, electricity voltage requirement, motor power and purpose of use. All of our machines can run 24 hours a day non-stop and the yield rates are similar for most seeds and nuts. The powerful engines (11 kW) of the NF1500 and NF2000 models provide the most efficient oil production even for very hard seeds (rosehip seed, prickly pear seed, pomegranate seed, and primrose seed etc.). You can choose one of the NF80 / NF100 / NF500 / NF600 models for low capacity needs in houses, shops, boutiques, research and development laboratories, fairs and hotels. 220 Volt single phase electrical energy is required for these 4 machines and these machines are suitable for use anywhere. They can be easily carried by 2 or 3 people. One of the NF1000 / NF1500 / NF2000 / NF4000 models should be preferred in facilities, factories or industries with intensive production. They work on 380 Volt three phase electricity. In addition, NF600 and above models have a self-lubricating system.
You can prefer NF80 / NF100 / NF500 / NF600 in houses or for small trade, and NF1000 / NF1500 / NF2000 / NF4000 machines for industry or larger businesses.
Our machines come pre-installed and are relatively easy to use. It can be operated for a long time after the first operational experience is gained. You can reach all the instructions and details regarding usage on the relevant machine webpage or you can always contact our technical team.
Payment term is T/T. You can send your payments in Turkish Liras / US Dollars / Euros / Great Britain Pounds to our bank accounts (supplied in contact webpage) or pay them in cash. For the machines that are not in stock, 50% of the total amount is deposited in advance and the rest is paid after manufacturing of the machine is completed. The machine is shipped upon payment of the full amount. Payments are not accepted except for the aforementioned payment methods.
If machine is in stock, it is shipped after full payment is received. If the requested machine is not available in stock, shipping is started after manufacturing the machine and upon receival of the full funds. Always remember to ask for stock availability of the machine of your choosing and probable lead times if it is not present in stock. You can claim your machine in our factory yourself or you can request it to be sent to your address / an airport / a harbor by shipping/cargo companies. We can attend to many shipment options especially to EXW, FOB, CFR, CPT, CIF, DDU, DAP, DDP type of deliveries.
PLEASE check the following items before accepting delivery of your machine from the shipping company.
- Always open your cargo while the cargo attendant is present there with you. Do not accept and sign off delivery without checking the contents of the cargo.
- If the product is damaged or missing, please ask for a "Damage Assessment Report".
Kargo ile gelen makinanızı teslim almadan önce aşağıdaki maddeleri LÜTFEN kontrol ediniz.
- Kargonuzu mutlaka kargo görevlisi yanında açınız. Kargo içeriğini kontrol etmeden teslim almayınız. İmza atmayınız.
- Ürün hasarlıysa veya eksikse “Hasar Tespit Tutanağı” isteyiniz.
Warranty certificate is given for all machines. Machines without a warranty certificate are redeemed out of warranty. Warranty terms: The motor and gearbox are under 1 year warranty by their manufacturer (Watt-Drive) and the motor driver is under 2-years warranty by its manufacturer (ABB). All machines go through a strict quality control process before shipping. If anyhow there is a faulty part detected upon receival of the machine, users can apply for a change of the faulty part.
All machine parts are covered by a 10-years manufacturer warranty by our company (all spare parts will be available at least for 10 years). For lost or damaged parts, new ones are sold when the warranty certificate is presented.
Warranty coverage includes cases caused by manufacturer errors. Motor, gearbox and motor drivers are guaranteed by the manufacturers of the relevant parts, and no additional warranty is given by Karaerler Makina for these parts.
- Electrical problems caused by high and low voltage levels and power surges are not covered under the warranty.
- Damages caused by running the engine at low speeds are not covered under the warranty.
- Damages caused by stones, metals and similar things that are present in the input (due to the use of seeds and nuts that are not selected well) are not covered under the warranty.
- All faults caused by contact of heating resistance with water or oil are not covered under the warranty.
Karaerler Makina continuously manufacture machines. Spare parts stock is always full. Spare parts are sold in case of fault or loss of machine parts only to the customers who have bought that particular machine. Spare parts are not sold except for the aforementioned situations. You can find the spare parts list on the relevant product webpage and contact us for arranging its supply.
Filtreleme ihtiyacı az olsa da, yağ sıkma makinelerinden çıkan yağ Karaerler filtre makineleri yardımıyla ya da farklı çözümlerle filtrelenmekte ve tüketime hazır hale gelmektedir. Tüketime hazır haldeki yağlar için paketleme ve etiketleme sistemlerimiz henüz bulunmamaktadır. Bununla ilgili AR-GE çalışmalarımız devam etmektir.